LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1564 (Body - Interior & Exterior - 2500 Hd) >> Seats >> Seat, Rear >> Installation

Seat, Rear: Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0089094Courtesy of CHRYSLER GROUP, LLC
NOTE:

60/40 bench seat shown in the illustration, solid bench seat similar.

  1. Position the rear seat assembly into the vehicle. lift the seat hooks (3) onto the brackets (1 and 2).
    GC0089093Courtesy of CHRYSLER GROUP, LLC
  2. Install the front bolts (1).
    GC0089092Courtesy of CHRYSLER GROUP, LLC
  3. Loosely install the seat belts (3) and bolts (4).
  4. Install the remaining bolts (1), then tighten all bolts to 47 N.m (35 ft. lbs.).
    GC0089091Courtesy of CHRYSLER GROUP, LLC
  5. Position the shoulder belt (2) into place and install the bolt (1).
  6. Tighten the bolt to 23 N.m (17 ft. lbs.).
    GC0089090Courtesy of CHRYSLER GROUP, LLC
  7. If equipped, connect the electrical connectors (1).
  8. If equipped, install the subwoofer speaker. Refer to SPEAKER, INSTALLATION .
scientia non olet · About LEMON Manuals