Seat, Rear: Description
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
INDEX
| DESCRIPTION | FIGURE |
|---|---|
| CREW CAB | |
| REAR BENCH SEAT - CREW CAB | Refer to Fig 1. |
| REAR 60% SEAT - CREW CAB | Refer to Fig 2. |
| REAR 40% SEAT - CREW CAB | Refer to Fig 3. |
| QUAD CAB | |
| REAR BENCH SEAT - QUAD CAB | Refer to Fig 4. |
| REAR 60% SEAT - QUAD CAB | Refer to Fig 5. |
| REAR 40% SEAT - QUAD CAB | Refer to Fig 6. |
| 1 - SEAT BACK FOAM/COVER | 14 - SEAT BACK FRAME |
| 2 - OUTER PIVOT COVER | 15 - INNER COVER |
| 3 - RISER COVER | 16 - BACK PIVOT SPACER |
| 4 - SEAT BACK PIVOT BOLT 28 N.m (21 ft. lbs.) | 17 - OUTER PIVOT COVER SCREW |
| 5 - INNER COVER SCREW | 18 - LATCH ASSEMBLY |
| 6 - LATCH ASSEMBLY | 19 - INNER COVER SCREW |
| 7 - OUTER PIVOT COVER SCREW | 20 - SEAT BACK PIVOT BOLT 28 N.m (21 ft. lbs.) |
| 8 - INNER COVER | 21 - RISER COVER |
| 9 - CAB HOOK ISOLATOR | 22 - OUTER PIVOT COVER |
| 10 - PUSH PIN | 23 - SEAT CUSHION FRAME BOLTS 55 N.m (41 ft. lbs.) |
| 11 - HEADREST SLEEVE - SLAVE | 24 - SEAT CUSHION FRAME |
| 12 - HEADREST | 25 - SEAT CUSHION FRAME BOLTS 55 N.m (41 ft. lbs.) |
| 13 - HEADREST SLEEVE - MASTER | 26 - SEAT CUSHION FOAM/COVER |
| 1 - HEAT MAT - BACK | 19 - STORAGE LID BOLT 18 N.m (13 ft. lbs.) |
| 2 - SEAT BACK FOAM/COVER | 20 - SEAT CUSHION FRAME |
| 3 - ARMREST COVER | 21 - STORAGE BIN LID |
| 4 - ARMREST FOAM | 22 - INNER COVER |
| 5 - CUP HOLDER | 23 - OUTER PIVOT COVER SCREW |
| 6 - ARMREST CLOSE-OUT PANEL | 24 - ARMREST DETENT ISOLATOR |
| 7 - PIVOT ASSEMBLY | 25 - LATCH ASSEMBLY |
| 8 - CAB HOOK ISOLATOR | 26 - ARMREST DETENT ISOLATOR |
| 9 - PUSH PIN | 27 - PIVOT ASSEMBLY |
| 10 - HEADREST SLEEVE - SLAVE | 28 - ARMREST PIVOT BOLTS (2) |
| 11 - HEADREST | 29 - OUTER PIVOT COVER |
| 12 - HEADREST SLEEVE - MASTER | 30 - SEAT BACK PIVOT BOLTS (2) 18 N.m (13 ft. lbs.) |
| 13 - SEAT BACK FRAME | 31 - INNER COVER SCREWS (2) |
| 14 - ARMREST SCREWS 28 N.m (21 ft. lbs.) | 32 - SEAT CUSHION FRAME BOLTS (4) 55 N.m (41 ft. lbs.) |
| 15 - ARMREST NUTS 28 N.m (21 ft. lbs.) | 33 - STORAGE LID BOLT 28 N.m (21 ft. lbs.) |
| 16 - INNER COVER | 34 - RISER COVER |
| 17 - LATCH ASSEMBLY | 35 - SEAT CUSHION FOAM/COVER |
| 18 - OUTER PIVOT COVER | 36 - HEAT MAT - CUSHION |
| 1 - OUTER PIVOT COVER - INBOARD | 14 - SEAT CUSHION - FOAM/COVER |
| 2 - LATCH ASSEMBLY | 15 - HEAT MAT - CUSHION |
| 3 - CAB HOOK ISOLATOR | 16 - SEAT BACK PIVOT BOLTS (2) 28 N.m (21 ft. lbs.) |
| 4 - PUSH PIN | 17 - INNER COVER SCREW |
| 5 - HEADREST SLEEVE - SLAVE | 18 - SEAT CUSHION FRAME BOLTS (4) 55 N.m (41 ft. lbs.) |
| 6 - HEADREST | 19 - RISER COVER |
| 7 - HEADREST SLEEVE - MASTER | 20 - STORAGE LID BOLT 18 N.m (13 ft. lbs.) |
| 8 - SEAT BACK FRAME | 21 - STORAGE BIN LID |
| 9 - INNER COVER | 22 - SEAT CUSHION FRAME |
| 10 - LATCH ASSEMBLY | 23 - INNER COVER |
| 11 - OUTER PIVOT COVER | 24 - STORAGE LID BOLT 18 N.m (13 ft. lbs.) |
| 12 - HEAT MAT - BACK | 25 - OUTER PIVOT COVER SCREW |
| 13 - SEAT BACK - FOAM/COVER |
| 1 - SEAT BACK - FOAM/COVER | 9 - SEAT BACK FRAME |
| 2 - SEAT BACK PIVOT BOLT 28 N.m (21 ft. lbs.) | 11 - LATCH ASSEMBLY |
| 3 - LATCH ASSEMBLY | 12 - SEAT BACK PIVOT BOLT 28 N.m (21 ft. lbs.) |
| 4 - CAB HOOK ISOLATOR (2) | 13 - SEAT CUSHION FRAME BOLTS 55 N.m (41 ft. lbs.) |
| 5 - CAB HOOK ISOLATOR PUSH PIN (4) | 14 - SEAT CUSHION FRAME |
| 6 - HEADREST SLEEVE - SLAVE | 15 - SEAT CUSHION FRAME BOLTS 55 N.m (41 ft. lbs.) |
| 7 - HEADREST | 16 - SEAT CUSHION FOAM/COVER |
| 8 - HEADREST SLEEVE - MASTER |
| 1 - SEAT BACK FOAM/COVER | 8 - LATCH ASSEMBLY |
| 2 - CAB HOOK ISOLATOR | 9 - SEAT CUSHION FRAME |
| 3 - PUSH PIN | 10 - LATCH ASSEMBLY |
| 4 - HEADREST SLEEVE - SLAVE | 11 - SEAT BACK PIVOT BOLTS (2) 28 N.m (21 ft. lbs.) |
| 5 - HEADREST | 12 - SEAT CUSHION FRAME BOLTS (4) 55 N.m (41 ft. lbs.) |
| 6 - HEADREST SLEEVE - MASTER | 13 - SEAT CUSHION FOAM/COVER |
| 7 - SEAT BACK FRAME |
| 1 - CAB HOOK ISOLATOR | 8 - SEAT CUSHION FOAM/COVER |
| 2 - PUSH PIN | 9 - SEAT CUSHION FRAME BOLTS (4) 55 N.m (41 ft. lbs.) |
| 3 - HEADREST SLEEVE - SLAVE | 10 - SEAT BACK PIVOT BOLTS (2) 28 N.m (21 ft. lbs.) |
| 4 - HEADREST | 11 - LATCH ASSEMBLY |
| 5 - HEADREST SLEEVE - MASTER | 12 - SEAT CUSHION FRAME |
| 6 - SEAT BACK FRAME | 13 - LATCH ASSEMBLY |
| 7 - SEAT BACK FOAM/COVER |