LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1564 (Body - Interior & Exterior - 2500 Hd) >> Seats >> Seat, Front >> Removal >> Driver Side

Driver Side

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0089068Courtesy of CHRYSLER GROUP, LLC
  1. Before proceeding with the following repair procedure, review all warnings and cautions. Refer to SEATS, WARNING .
  2. Remove the trim cover (1).
    GC0089069Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the electrical connectors (1) and (2), if equipped.
    GC0089070Courtesy of CHRYSLER GROUP, LLC
    NOTE: If vehicle is equipped with a media hub in the floor console, unclip the harness connectors from the seat frame.
  4. Remove the front mounting bolts (1) from the driver side seat.
  5. Remove the rear bolts (2) and remove the diver seat.
scientia non olet · About LEMON Manuals