Crew Cab
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the trim panel. Refer to PANEL, DOOR TRIM, REMOVAL .
- Remove the door speaker. Refer to SPEAKER, REMOVAL
.
- Install the window switch if required and lower the glass down in the door to position the glass attachment clips for access through the speaker opening (4) and the service access plug.
- Release the two glass retainer tabs and separate the glass clip from the regulator lift plate.
- Raise the glass into the full up position and secure in place using tape or equivalent.