Club Cab
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the trim panel. Refer to PANEL, DOOR TRIM, REMOVAL .
- If equipped, using a punch or similar tool, carefully remove the glass disconnect hole plugs (1).
- Install the window switch if required and lower the glass down in the door to position the glass attachment clip for access through the service access plug (1).
- Release the two glass retainer tabs and separate the glass clip from the regulator lift plate.
- Raise the glass into the full up position and secure in place using tape or equivalent.