Bin, Instrument Panel: Removal
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Remove glove box from instrument panel. Refer to GLOVE BOX, INSTRUMENT PANEL, REMOVAL .
- Through the glove box opening remove storage bin fastener (2) located at the back of the storage bin (1).
- Open storage bin door (1).
- Disengage the retainer clips that secure the storage bin (2) to the instrument panel (3).
- Partial remove the storage bin and disconnect the storage bin light electrical connector.
- Remove storage bin (2) from vehicle.