Latch, Hood: Installation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the hood latch cable (1) to the hood latch (5).
- Position the hood latch to the upper radiator crossmember and loosely install the two bolts (2) that secure the latch to the crossmember.
- Align the hood latch to the upper radiator crossmember using the reference marks made during the Removal procedure and tighten the bolts to 11 N.m (8 ft. lbs.).
- If required, adjust the hood to the correct position. Refer to GAP AND FLUSH, SPECIFICATIONS .