LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1564 (Body - Interior & Exterior - 2500 Hd) >> Front Door >> Molding, Door Belt, Outer >> Removal

Molding, Door Belt, Outer: Removal

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0088951Courtesy of CHRYSLER GROUP, LLC
  1. Remove the screw from the rear of the outer belt molding (2).
  2. Starting from the rear of the door, carefully lift the belt molding upward and disengage the inner portion of the molding from the tabs on the door.
  3. Pull the molding rearward to disengage the molding from the outside mirror.
  4. Remove the belt molding from the door.
scientia non olet · About LEMON Manuals