2500/3500 Heavy Duty
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the six fender flare retainers (3).NOTE:
Make sure the push-pin is completely removed.
- Cut off the alignment push-pin (1) located in the middle of the fender flare.CAUTION:
Use of a trim stick maybe necessary to remove the fender flare. Use care not to scratch the paint.
- Remove the fender flare by starting at the bottom rear of the fender flare.NOTE:
Make sure all adhesive tape is removed.
- Remove the adhesive tape from the fender using 3M General Purpose Adhesive Cleaner or equivalent.