Cable, Tailgate: Installation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Position the tailgate check cable (3) onto the left and right side of the tailgate as necessary.
- Install the bolt (4) that secures the small end of the tailgate check cable(s) to the tailgate and tighten the bolt(s) to 23 N.m (17 ft. lbs.).
- Position the tailgate check cable (3) to the left and right side of the cargo box below the tailgate striker (1) as necessary.
- Install the large end of the tailgate check cable(s) onto the cargo box. Make sure that the cable lock tab(s) (4) fully engage.