LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1562 (Steering System - 2500 Hd) >> Pump >> Reservoir, Power Steering Pump >> Removal >> Removal- Gasoline Engine

Removal- Gasoline Engine

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain and siphon the power steering fluid from the reservoir.
  2. Remove the serpentine belt.
  3. Remove the power steering pump. Refer to PUMP, REMOVAL .
    GC0092302Courtesy of CHRYSLER GROUP, LLC
  4. Remove the reservoir mounting bolts (2).
  5. Remove the reservoir (1).
  6. Remove the rear bracket to the pump mounting bolts (if equipped).
scientia non olet · About LEMON Manuals