LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1562 (Steering System - 2500 Hd) >> Pump >> Reservoir, Power Steering Pump >> Installation >> Installation-Diesel Engine

Installation-Diesel Engine

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the reservoir (2) to the bracket and install the reservoir mounting bolt (1). Tighten the reservoir mounting bolt to the proper specifications. Refer to PUMP, TECHNICAL SPECIFICATIONS .
    GC0161608Courtesy of CHRYSLER GROUP, LLC
  2. Connect the return hose.
  3. Install the splash shield.
  4. Fill the reservoir with power steering fluid. Refer to PUMP, STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals