LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1562 (Steering System - 2500 Hd) >> Linkage, Link And Coil >> Drag Link, Steering, Link And Coil >> Removal >> To Pitman Arm

To Pitman Arm

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0161598Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the drag link to pitman arm nut (7).
  3. Loosen the jam nuts on the drag link adjuster sleeve (4).
    GC0108919Courtesy of CHRYSLER GROUP, LLC
  4. Remove the drag link (2) from the pitman arm (1), with (special tool #C-3894-A, Puller, Tie Rod) (3).
  5. Remove the drag link from the adjuster sleeve.
scientia non olet · About LEMON Manuals