LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1562 (Steering System - 2500 Hd) >> Linkage, Link And Coil >> Damper, Steering, Link And Coil >> Installation >> Bracket - 2500, 3500

Bracket - 2500, 3500

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0161542Courtesy of CHRYSLER GROUP, LLC
  1. Position the steering damper brackets and install the retaining bolts (3). Tighten bolts to specifications. Refer to LINKAGE, LINK AND COIL, TECHNICAL SPECIFICATIONS .
  2. Position the steering damper (1) onto the brackets.
  3. Install the steering damper retaining bolts (2) and tighten to specifications. Refer to LINKAGE, LINK AND COIL, TECHNICAL SPECIFICATIONS .
  4. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals