LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 ((Driver Door Module (DDM) (DMFL) - Electrical Diagnostics)) >> DTC Troubleshooting >> B2598-96-Door Module Front Left - Component Internal Failure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. TEST FOR INTERMITTENT CONDITION 
    1. Turn the ignition on.
    2. With the scan tool, record and erase the DTC's.
    3. Operate the Driver Window up and down several times.
    4. Wait 30 seconds.
    5. With the scan tool, read the active DTC's.

      Does the scan tool display B2598-96-DOOR MODULE FRONT LEFT - COMPONENT INTERNAL FAILURE?

      Yes 

      • Replace the Door Module in accordance with the Service Information.
      • Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .

      No 

      • The conditions that caused this code to set are not present at this time. If this code ever repeats, replace the door module in accordance with the Service Information.
      • Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .