LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 ((Driver Door Module (DDM) (DMFL) - Electrical Diagnostics)) >> DTC Troubleshooting >> B1D4A-2A-Memory Switch Input - Signal Stuck In Range >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The Door Module receives a conflicting input from the (G200) Memory Select Switch Mux circuit for more than 30 seconds.

scientia non olet · About LEMON Manuals