LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Electronic Control Modules (Service Information)) >> Module, Park Assist >> Installation >> Installation

Module, Park Assist: Installation: Installation

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Park Assist Module
GC0087511Courtesy of CHRYSLER GROUP, LLC
  1. Position the park assist module (1) at the mounting bracket (2) bonded to the back of the headliner (3).
  2. Secure the module to the bracket with two fasteners (4).
  3. Reconnect the two body wire harness connectors (5) to the module connector receptacles.
  4. Reinstall the vehicle headliner. Refer to HEADLINER, INSTALLATION .
  5. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals