LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Message Center (Service Information)) >> Center, Electronic Vehicle Information >> Diagnosis And Testing >> Diagnosis And Testing - EVIC

Diagnosis And Testing - EVIC

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The Electronic Vehicle Information Center (EVIC) relies upon electronic message inputs received over the Controller Area Network (CAN) data bus from other electronic modules in the vehicle. The EVIC will not function properly if the bus messages from any of these modules are not received. If no EVIC data is displayed, check the CAN data bus communications as well as other instrument cluster (also known as the Cab Compartment Node/CCN) functions.

The use of a diagnostic scan tool and the proper diagnostic procedures is required for further testing of the EVIC and the CAN data bus. Refer to the appropriate wiring information for complete circuit schematics and connector pin-out information.

scientia non olet · About LEMON Manuals