LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Emissions Control) >> Exhaust Gas RECIRCULATION Valve, 6.7L Diesel >> Sensor, EGR Temperature >> Installation >> Pick Up Models

Pick Up Models

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: EGR Temperature Sensor
GC0110284Courtesy of CHRYSLER GROUP, LLC
  1. Clean EGR crossover tube at sensor mounting point.
  2. Check condition of the sensors metal gasket and replace if necessary.

  3. Install EGR temperature sensor (1) to EGR tube (6). Tighten to 18 N.m (159 in. lbs.).
  4. Connect EGR temperature sensor (1) harness connector (2).
scientia non olet · About LEMON Manuals