LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Emissions Control) >> Diesel Exhaust Fluid Emissions, 6.7L Diesel >> Line, Diesel Exhaust Fluid Pressure >> Installation >> Installation

Line, Diesel Exhaust Fluid Pressure: Installation: Installation

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: DEF Pressure Line, Injector & Coolant Lines
GC0143716Courtesy of CHRYSLER GROUP, LLC
  1. Install the DEF pressure line (2) at injector (3).
  2. Connect the DEF pressure line retainer at the frame rail and coolant lines (1).
    Fig 2: DEF Pressure Line & Heater Harness Connector
    GC0143717Courtesy of CHRYSLER GROUP, LLC
  3. Connect the DEF pressure line (1) at the DEF supply pump.
  4. Connect the Diesel Exhaust Fluid (DEF) pressure line heater harness connector (2).
  5. Connect both negative battery cables.
scientia non olet · About LEMON Manuals