68 RFE Automatic

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Transmission Mount & Bolts - 68RFE A/T - 4WD

Courtesy of CHRYSLER GROUP, LLC

NOTE:

4x4 Models.

CAUTION:

If replacing a engine mount/bracket, be certain to inspect all other engine mounts/brackets in the system. Failure to follow this caution may result in damage to the vehicle.

Raise the vehicle on a hoist.
Position a transmission jack in place.
Remove nuts securing transmission mount to crossmember.
Raise the transmission.
Remove bolts (1) and the rear transmission mount (2).

Fig 2: Rear Transmission Mount & Bolts - 68RFE A/T - 4X2 Regular Cab Models
Courtesy of CHRYSLER GROUP, LLC

NOTE:
4x2 Regular Cab Models.

CAUTION:
If replacing a engine mount/bracket, be certain to inspect all other engine mounts/brackets in the system. Failure to follow this caution may result in damage to the vehicle.
Raise the vehicle on a hoist.
Position a transmission jack in place.
Remove nuts securing transmission mount to crossmember.
Raise the transmission.
Remove bolts (1) and the rear transmission mount (2).

Fig 3: Rear Transmission Mount & Bolts - 68RFE A/T - 4X2 Crew & Mega Cab Models
Courtesy of CHRYSLER GROUP, LLC

NOTE:
4x2 Crew and Mega Cab Models.

CAUTION:
If replacing a engine mount/bracket, be certain to inspect all other engine mounts/brackets in the system. Failure to follow this caution may result in damage to the vehicle.
Raise the vehicle on a hoist.
Position a transmission jack in place.
Remove nuts securing transmission mount to crossmember.
Raise the transmission.
Remove bolts (1) and the rear transmission mount (2).