LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (6.7L Engine (Service Information)) >> Cylinder Head >> Cover(S), Cylinder Head >> Removal >> Rocker Housing

Rocker Housing

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cylinder Head Assembly & Gasket
GC0108488Courtesy of CHRYSLER GROUP, LLC
  1. Remove the cylinder head cover. Refer to COVER(S), CYLINDER HEAD, REMOVAL, 6.7L .
  2. Remove injector harness nuts from injectors.
  3. Remove cylinder head cover gasket.
  4. Remove rocker housing bolts.
  5. Remove rocker housing and gasket.
scientia non olet · About LEMON Manuals