Bulb - Park/Turn Signal/Side Marker

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Dual Headlamps

Courtesy of CHRYSLER LLC

Fig 2: Quad Headlamps

Courtesy of CHRYSLER LLC

Remove the front lamp unit (1) from the vehicle. Refer to UNIT, Front Lamp , Removal .
Firmly grasp the park/turn signal/side marker bulb socket (4) on the back of the front lamp unit housing and rotate it counterclockwise about 30 degrees to unlock it.
Pull the socket and bulb straight out from the keyed opening in the housing.

Fig 3: Light Bulb & Socket
Courtesy of CHRYSLER LLC
Pull the base of the bulb (2) straight out of the socket (1).