LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Lamps/Lighting - Exterior (Service Information)) >> LAMP, Tail Stop Turn >> Removal >> Bracket - Cab And Chassis

Bracket - Cab And Chassis

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Tail Lamp Bracket, Outer Frame Rail & Anti-Rotation Tab
GC0137106Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the tail lamp from the lamp bracket (1). Refer to LAMP, Tail Stop Turn , Removal .
  3. Remove the screw (4) that secures the bracket to the outside of the frame rail (3).
  4. Remove the bracket from the frame.
scientia non olet · About LEMON Manuals