Bracket - Cab And Chassis
WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Position the tail lamp bracket (1) to the outer frame rail (3). Be certain to engage the anti-rotation tab (2) in the frame clearance hole (upper hole - left side, or lower hole - right side).
- Install and tighten the screw (4) that secures the bracket to the frame. Tighten the screw to 55 N.m (41 ft. lbs.).
- Reinstall the tail lamp onto the bracket. Refer to LAMP, Tail Stop Turn , Installation .
- Reconnect the battery negative cable.