LAMP, Fog: Removal: Bulb
WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result.
- Disconnect and isolate the battery negative cable.
- Reach under and behind the front bumper or fascia to access the back of the fog lamp housing (1) on the back of the bumper or fascia.
- Disconnect the fog lamp jumper wire harness connector (3) from the fog lamp bulb (2) connector receptacle.
- Firmly grasp the bulb on the back of the housing and rotate it counterclockwise about 30 degrees to unlock it.
- Pull the bulb straight out from the keyed opening in the housing.