LAMP, Cab: Installation: Bulb

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the lamp, the socket or the lamp wiring.

Fig 1: Removing/Installing CAB Clearance Lamp Bulb

Courtesy of CHRYSLER LLC

Align the base of the bulb (3) with the socket (2).
Push the bulb straight into the socket until the base is firmly seated.
Reinstall the cab clearance lamp (1) onto the roof panel. Refer to LAMP, Cab , Installation .
Reconnect the battery negative cable.