Muffler, Exhaust: Installation: 6.4L
WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Install the muffler hanger isolators (2).
- Install the muffler to the exhaust extension pipe and tighten band clamp nut (1) to the proper SPECIFICATIONS .
- Position the tailpipe to the muffler.
- Install the tailpipe hanger isolator (4).
- Tighten the tailpipe to muffler band clamp nut (3) to the proper SPECIFICATIONS .
- Check the exhaust system for contact with the body panels. A minimum of 25 mm (1.0 in.) is required between the exhaust system components and body/frame parts. Make the necessary adjustments, if needed.
- Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.