Section 1294 (G56 Manual Transmission (Service Information) 2500 Hd & 3500 Hd): Assembly: Assembly: Countershaft

WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Heating Bearing

Courtesy of CHRYSLER GROUP, LLC

Install first/reverse gear bearing oil slinger on the rear housing end of the countershaft.
Heat rear housing countershaft bearing (1) on bearing heater (2) to a maximum of 150 Celsius (300° Fahrenheit).

Fig 2: Rear Housing Countershaft Bearing
Courtesy of CHRYSLER GROUP, LLC
Using welding gloves or tongs, install countershaft bearing (1) on countershaft (2).

Fig 3: Heating Bearing
Courtesy of CHRYSLER GROUP, LLC
Heat front housing countershaft bearing (1) on bearing heater (2) to a maximum of 150 Celsius (300° Fahrenheit).

Fig 4: Housing Countershaft Bearing
Courtesy of CHRYSLER GROUP, LLC
Using welding gloves or tongs, install front housing countershaft bearing (1) on countershaft (2).