Transmission Fill
WARNING: This page is about a different car, the 2016 RAM 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
To avoid overfilling transmission after a fluid change or overhaul, perform the following procedure:
- Remove dipstick and insert clean funnel in transmission fill tube.
- Add following initial quantity of Mopar® ASRC ATF to transmission:
- If only fluid and filter were changed, add 6.8L (7.2 quarts) of ASRC to transmission.
- If transmission was completely overhauled and the torque converter was replaced or drained, add 13L (13.75 quarts) of Mopar® ASRC ATF to transmission.
- Check the transmission fluid and adjust as required.