LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Cooling System - Engine & Transmission) >> Engine >> Sensor, Coolant Temperature >> Installation >> 5.7L Engine

5.7L Engine

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Coolant Temperature (ECT) Sensor & Thermostat
GC0087442Courtesy of CHRYSLER GROUP, LLC
NOTE:

Viscous fan, fan shroud and electric cooling fan removed for clarity.

  1. Apply thread sealant to the engine coolant temperature (ECT) sensor (2) threads.
  2. Install the ECT sensor (2) into engine.
  3. Tighten the ECT sensor (2) to 11 N.m (8 ft. lbs.) torque.
  4. Connect the electrical connector to the ECT sensor (2).
  5. Fill the cooling system the proper level. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals