3.7L/4.7L/5.7L Engine
WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the exterior grille. Refer to GRILLE, REMOVAL .
- Partially drain the cooling system using the draincock only. Refer to STANDARD PROCEDURE .NOTE:
DO NOT WASTE reusable coolant. If solution is clean, drain coolant into a clean container for reuse.
- Drain system below the level of the coolant recovery pressure container.
- Remove the recovery hose (1) from the radiator.
- Remove the coolant recovery bottle (2) to radiator support mounting bolts.
- Disengage the coolant recovery bottle (2) mounting pins located on the radiator support side by pulling the assembly straight up.
- Remove the coolant recovery bottle (1).