LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1277 (Steering System - 2500 Hd & 3500 Hd) >> Linkage, Link And Coil >> Drag Link, Steering, Link And Coil >> Removal >> RH - To Tie Rod

RH - To Tie Rod

WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Tightening Tie Rod Adjustment Sleeve Clamp Bolt
GC0161598Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the drag link to tie rod nut (2).
  3. Loosen the jam nuts on the drag link adjuster sleeve (4) as necessary.
  4. Remove the drag link (3) from the tie rod (1).
  5. Remove the drag link (3) from the adjuster sleeve (4).
scientia non olet · About LEMON Manuals