LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1277 (Steering System - 2500 Hd & 3500 Hd) >> Linkage, Link And Coil >> Damper, Steering, Link And Coil >> Installation >> Bracket - 2500, 3500

Bracket - 2500, 3500

WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Damper, Steering, Link & Coil
GC0161542Courtesy of CHRYSLER GROUP, LLC
  1. Position the steering damper brackets and install the retaining bolts (3). Tighten bolts to specifications. Refer to LINKAGE, LINK AND COIL, SPECIFICATIONS .
  2. Position the steering damper (1) onto the brackets.
  3. Install the steering damper retaining bolts (2) and tighten to specifications. Refer to LINKAGE, LINK AND COIL, SPECIFICATIONS .
  4. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals