Signal Lamp
WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- If it isn't already so, move the mirror head to the horizontal position (3).
- Remove the convex mirror glass and case (2) from the mirror housing, leaving the flat mirror glass and case (1) undisturbed. Refer to MIRROR, OUTSIDE REARVIEW, REMOVAL and MIRROR, OUTSIDE REARVIEW, GLASS, REMOVAL .
- Disconnect the mirror wire harness connector (3) from the signal lamp (1) connector receptacle.
- Remove the screw (4) that secures the lamp to the mirror housing (2).
- Separate and remove the signal lamp from the outside of the mirror housing. It may be necessary on some vehicles to gently pry between the lamp lens and the mirror housing to release the adhesive-backed foam weather seal that seals the lamp to the mirror housing.