Puddle Lamp

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Puddle Lamp Lens & Mirror Arm

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the battery negative cable.
Using a small flat-bladed screw driver (3), carefully pry between the outboard side of the puddle lamp lens (2) and the underside of the fixed (door) half of the mirror arm (1) to unsnap the lamp from the arm.

Fig 2: Identifying Puddle Lamp, Mirror Wire Harness Connectors & Latch Feature
Courtesy of CHRYSLER GROUP, LLC
Disengage the two hooks (4) on the inboard side of the puddle lamp (1) from the inboard side of the lamp opening in the mirror arm.
Pull the lamp away from the mirror arm far enough to access and disconnect the two mirror wire harness connectors (2) from the two terminals of the puddle lamp.
Remove the puddle lamp from the mirror.