Fastener Torque Specifications
WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
| Description | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| All Screws NOT Listed Below | 1.1 | - | 10 |
| A/C Compressor to Engine | Specific fastener placement and torque pattern is required. For more information, refer to INSTALLATION . | ||
| A/C Condenser Bolts | 2.2 | - | 20 |
| A/C Compressor Clutch Plate Bolt | 19 | - | 168 |
| A/C Expansion Valve Bolts | 11 | - | 97 |
| A/C Heater Control Screws | 2.2 | - | 20 |
| Air Ducts to Instrument Panel Screws | 2.2 | - | 20 |
| Blower Motor Screws | 1.7 | - | 15 |
| HVAC Housing to Engine Side of Dash Panel Nuts | 6.8 | - | 60 |
| HVAC Housing to Floor Bracket Bolt | 6.8 | - | 60 |
| HVAC Housing to Passenger Side of Dash Panel Nuts | 6.8 | - | 60 |
| Refrigerant Lines Nuts/Bolts | 23 | 17 | - |