A/C Compressor

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: A/C Compressor

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Typical Denso A/C compressor shown in illustration.

The A/C system on models equipped with the 3.7L and 4.7L engine use the Denso 10SRE15 A/C compressor (1). This A/C compressor has a fixed displacement of 150 cubic centimeters (9.2 cubic inches).

The A/C system on models equipped with the 5.7L engine use the Denso 10SRE18 A/C compressor. This A/C compressor has a fixed displacement of 180 cubic centimeters (11 cubic inches).

The A/C system on models equipped with the 6.7L diesel engine use the Denso 10S17 A/C compressor. This A/C compressor has a fixed displacement of 170 cubic centimeters (10.4 cubic inches).

All A/C compressors are ten cylinder, reciprocating swash plate type compressors with the suction and discharge ports (2) located on the compressor cylinder head (3) and have a label identifying the use of R-134a refrigerant.