LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Heating & Air Conditioning (Service Information)) >> Distribution >> Outlet, Air >> Installation >> Front Center Air Outlets

Front Center Air Outlets

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Take the proper precautions to protect the front face of the center bezel from cosmetic damage during this procedure.

Fig 1: Center Air Outlet
GC0089571Courtesy of CHRYSLER GROUP, LLC
  1. Position the center air outlet(s) (1) to the back of the instrument panel center bezel (2) and engage the bottom of each outlet to the center bezel.
    Fig 2: Air Outlet Retaining Clips
    GC0089572Courtesy of CHRYSLER GROUP, LLC
  2. Carefully engage the eight plastic retaining clips (2) that secure each air outlet (1) to the center bezel (3). Make sure the retaining clips are fully engaged.
  3. Install the instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, INSTALLATION .
  4. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals