LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Heating & Air Conditioning (Service Information)) >> Controls >> Sensor, Infrared Temperature >> Removal >> Removal

Sensor, Infrared Temperature: Removal: Removal

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Infrared Sensor & Screw
GC0089527Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the overhead console (1) and place it on a workbench. Refer to CONSOLE, OVERHEAD, FRONT, REMOVAL .
  3. Remove the screw (3) that secures the infrared sensor (2) to the overhead console and remove the sensor.
scientia non olet · About LEMON Manuals