LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1224 (Emissions Control - 2500 Hd & 3500 Hd) >> Diesel Exhaust Fluid Emissions >> Unit, Diesel Exhaust Fluid Dosing Control >> Installation >> Installation

Unit, Diesel Exhaust Fluid Dosing Control: Installation: Installation

WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Diesel Exhaust Fluid Dosing Control Unit, Tank & Nut
GC0155396Courtesy of CHRYSLER GROUP, LLC
  1. Install the Diesel Exhaust Fluid (DEF) dosing control unit. Tighten bolt (1) to 12 N.m (9 ft. lbs.).
    Fig 2: Diesel Exhaust Fluid Dosing Control Unit & Wire Harness Connectors
    GC0155402Courtesy of CHRYSLER GROUP, LLC
  2. Connect the DEF pump wire harness connector (1).
  3. Connect the body side DEF dosing control unit harness connector (2).
  4. Install the DEF tank (3). Refer to TANK, DIESEL EXHAUST FLUID, INSTALLATION .
  5. Connect both negative battery cables.
  6. The DEF dosing control unit is a generic module that needs to be flashed. Using the scan tool, flash DEF dosing control unit with the latest available software calibration.
scientia non olet · About LEMON Manuals