Sensor, Air Temperature, Intake: Installation: 6.4L

WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: IAT Sensor & Electrical Connector

Courtesy of CHRYSLER GROUP, LLC

The intake manifold air temperature (IAT) sensor (1) is installed into the front of the intake manifold air box plenum.

Check condition of sensor O-ring.
Clean sensor mounting hole in intake manifold.
Position sensor into intake manifold and rotate clockwise until past release tab.
Install electrical connector.