Relay, Intake Air Heater: Removal: Removal

WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Air Heater & Components

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate both of the negative battery cables.
Disconnect relay trigger wires (4) at relays. Note position of wiring before removing.
Remove nuts (2) at cable connectors and disconnect cables (1 and 3) from mounting studs. Note position of cables before removing.

Fig 2: Air Intake Heater Relay, Right Battery Tray & Fasteners
Courtesy of CHRYSLER GROUP, LLC
Remove screws (2) and the relay assembly (3).