Module, Drivetrain Control: Operation: Operation: Inputs/Outputs

WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The following are inputs to the DTCM:

Transfer Case Mode Sensor Signal
1 Direct Battery Feed
Ignition RUN Sense
Sensor Ground
Module Ground
CAN C Bus

The following are outputs of the DTCM:

Transfer Case Motor Brake Control
5V Sensor Supply
Transfer Case Bi-directional Motor Control (A AND B)
Switched B+ Solenoid Supply
Transfer Case Motor Brake Control