Solenoid, Variable Valve Timing (VVTS), Exhaust: Removal: Removal
WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Remove intake manifold. Refer to MANIFOLD, INTAKE, REMOVAL, 5.7L .
- Disconnect VVTS electrical connector (2).
- Remove VVTS fastener (1).
NOTE:
To remove the VVTS, the engine must be at room temperature.
- Rotate and pull the VVTS out.