Pump, Engine Oil: Installation: Installation
WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Position the oil pump on the crankshaft and install the oil pump retaining bolts finger tight.
- Using the sequence shown in illustration, tighten the oil pump bolts to 28 N.m (21 ft. lbs.).
- Install the timing cover. Refer to COVER(S), ENGINE TIMING, INSTALLATION, 5.7L .
- Install the oil pan. Refer to PAN, OIL, INSTALLATION, 5.7L .