Section 12 (Battery System - Service Information): Inspection: Inspection
WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
The following information details the recommended inspection procedures for the battery and related components. In addition to the maintenance schedules. Refer to Maintenance Schedules , Description . it is recommended that these procedures be performed any time the battery or related components must be removed for vehicle service.
- Inspect the battery cable terminal clamps for damage. Replace any battery cable that has a damaged or deformed terminal clamp.
- Inspect the battery tray and battery hold down hardware for damage. Replace any damaged parts.
- Slide the thermal guard off of the battery case (if equipped). Inspect the battery case for cracks or other damage that could result in electrolyte leaks. Also, check the battery terminal posts for looseness. Batteries with damaged cases or loose terminal posts must be replaced.
- Inspect the battery thermal guard (if equipped) for tears, cracks, deformation or other damage. Replace any battery thermal guard that has been damaged.
- If the battery is discharged, charge as required, for the proper battery charging procedures. Refer to BATTERY , Standard Procedure .