LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Front Axle - 9 1/4 Aa) >> Case Assembly, Differential, Electric Locker >> Diagnosis And Testing >> Diagnosis And Testing - Differential-Electric Locker

Diagnosis And Testing - Differential-Electric Locker

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position vehicle on host with wheels of the ground.
  2. Turn key to the on position.
    NOTE:

    System will time out within 2 minutes, when the key is in the on position and the engine is not running.

  3. Place vehicle in drive/first gear and transfer case in LOW LOCK.
  4. Activate locker switch and lock rear axle.
  5. Activate locker switch for front axle.
  6. Hold one wheel and rotate the other wheel which should lock once the dog clutch is aligned.
  7. Turn off locker switch.
  8. Hold one wheel and rotate the other wheel which should turn.
NOTE:

Only the locker actuator with sensor is serviced. Internal differential components are serviced as a differential case assembly.

scientia non olet · About LEMON Manuals