LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1150 (3.6L - DTCS P1622 To P2610 - 1500) >> DTC Troubleshooting >> P1CF4-Battery Temperature Sensor Out Of Range High >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR AN ACTIVE DTC 

NOTE:

Diagnose and repair any ECT or AAT Sensor DTCs that may be present before continuing with this test procedure.

NOTE:

Diagnose and repair any BCM LIN BUS communication or IBS DTCs that may be present before continuing with this test procedure.

  1. With the scan tool, read DTCs and record on the repair order.

    Is the DTC active or pending?

    Yes 

    • Replace the Intelligent Battery Sensor in accordance with the Service Information.
    • Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .

    No