LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1149 (3.6L - DTCS P061C To P1621 - 1500) >> DTC Troubleshooting >> P1205-Fuel Pump Control Module Internal Performance >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR AN ACTIVE DTC 

  1. Turn the ignition on, engine not running.
  2. With the scan tool, read DTCs and record on the repair order.

    Is the DTC active or pending?

    Yes 

    • Replace the Fuel Pump Control Module in accordance with the Service Information.
    • Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .

    No